The answer to your vertical conveying need....
Back
|
|
Basic model specs
“LT” series ( conveying width 127-381; standard shaft 25mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
573LM127SP |
C=700
D=789 G=178
|
573 | 636.5 | 127 | 80.3 | 225 | 1220 |
522LM178SP |
522 | 611 | 178 | 77.5 | 216 | 1220 | |
319LM381SP |
319 | 509.5 | 381 | 66.1 | 180.1 | 1220 |
“LN” series ( conveying width 178-483; standard shaft 25mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
772LM178SP |
C=950 D=1039 G=178 |
772 | 861 | 178 | 81.7 | 229.3 | 1524 |
620LM330SP |
620 | 785 | 330 | 75.3 | 209 | 1524 | |
467LM483SP |
467 | 708.5 | 483 | 68.8 | 188.7 | 1524 |
“A” series ( conveying width 178-635; standard shaft 25mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
1022M178SP |
C=1200 D=1289 G=216 |
1022 | 1111 | 178 | 128.7 | 376.9 | 2642 |
717M483SP |
717 | 958.5 | 483 | 112.2 | 325.2 | 2642 | |
565M635SP |
565 | 882.5 | 635 | 104 | 299.4 | 2032 |
“B” series ( conveying width 178-940; standard shaft 30mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
1322M178SP |
C=1500 D=1589 G=216 |
1322 | 1411 | 178 | 131.9 | 386.8 | 3251 |
1017M483SP |
1017 | 1258.5 | 483 | 118.6 | 345 | 3251 | |
814M686SP |
814 | 1157 | 686 | 109.7 | 317.2 | 2642 | |
560M940SP |
560 | 1030 | 940 | 98.6 | 282.4 | 2032 |
“C” series ( conveying width 178-1000; standard shaft 35mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
2022M178SP |
C=2200 D=2289 G=216 |
2022 | 2111 | 178 | 136 | 399.7 | 5080 |
1616M584SP |
1616 | 1908 | 584 | 123.7 | 360.9 | 5080 | |
1362M838SP |
1362 | 1781 | 838 | 116.1 | 337.3 | 4674 | |
1200M1000SP |
1200 | 1700 | 1000 | 111.2 | 321.9 | 4166 |
“HC” series ( conveying width 1001-1245; standard shaft 35mm)
Model | Dimension |
Inside Radius A |
Conveying Center-line B |
Conveying width F |
End Roll Diameter K |
Gear-in 1 RPM=MM |
Max.elevation (Per 360°) H |
1160HM1040SP |
C=2200 D=2289 G=305 |
1160 | 1680 | 1040 | 158.8 | 471.3 | 3658 |
1110HM1090SP |
1110 | 1655 | 1090 | 156.5 | 464.3 | 3658 | |
955HM1245SP |
955 | 1577.5 | 1245 | 149.6 | 442.6 | 3658 |
Note:
. End roll diameter at conveying centerline including belt thickness of 6.35mm
. Conveying width (F) is equivalent to the "between sideguard" (BSG) width.
The exposed belt width is approximately 25 mm narrower than the nominal conveying width(F).
. The chain cover and both sideguards extend 9.5mm past the true angle at both ends of the conveyor. The inside and outside radius frame lengths match the true angle.
Standard specification:
The above list is only a small example of the model sizes available from GUANCHAO. There are 6 standard family sizes based on the outside conveying radius (C) and a range of conveying widths (F). Any conveying width with the available range and having one of the S standard outside conveying radius, is considered a standard model. While GUANCHAO customs spiral belt conveyor, the standard models represenrs the shortest production lead time.
Characteristics
• Save space
• Continuous, uninterrupted, no overstock, no need for complex electronic control
• Positive drive belt system means no end roll slip
• Wide selection of entry and exit operation
• Custom designed for your particular operation
• Durable all steel construction
• Fully assembled contruction
• High conveying speeds available
• Steep angles of incline / decline available ( over 21° center-line)
• Multiple conveying belt available
Customization is available based on customers' needs.
【follow our wechat】