GUANCHAO Angled belt conveyor apply advanced technology of low tension driving belt to realize smooth merging or divering of cargo between two conveyors, also to minimize the accumlated heat on the angle bar, thus increasing the durability of belt.
BackBasic model specification
|
45° series |
A | B | C | D | E | F |
Lap speed 1 rpm=mm
|
Frame height |
|
330AXL788-45° |
254 | 788 | 981 | 569 | 341 | 330 | 329 | 178 |
|
686AXL965-45° |
610 | 965 | 1336 | 925 | 696 | 686 | 329 | 178 |
|
737AX1042-45° |
661 | 1042 | 1438 | 983 | 747 | 737 | 489 | 216 |
|
1092AX1524-45° |
1016 | 1524 | 2098 | 1339 | 1103 | 1092 | 489 | 216 |
|
991AXH1524-45° |
915 | 1524 | 2048 | 1237 | 1001 | 991 | 648 | 305 |
|
1600AXH2286-45° |
1524 | 2286 | 3114 | 1847 | 1611 | 1600 | 648 | 305 |
|
30° series |
A | B | C | E | F |
Lap speed 1 rpm=mm
|
Frame height |
|
330AXL945-30° |
254 | 945 | 1279 | 341 | 330 | 329 | 178 |
|
686AXL1253-30° |
610 | 1253 | 1895 | 696 | 686 | 329 | 178 |
|
737AX1511-30° |
661 | 1511 | 2196 | 747 | 737 | 489 | 216 |
|
1092AX1819-30° |
1016 | 1819 | 2787 | 1103 | 1092 | 489 | 216 |
|
991AXH1928-30° |
915 | 1928 | 2834 | 1001 | 991 | 648 | 305 |
|
1600AXH2456-30° |
1524 | 2456 | 3889 | 1611 | 1600 | 648 |
305 |
Application
Main characteristics:
· No need for compressed gas.
· Spring take-up tension system
· Whisper quiet operation
· 30 or 45 degree angles
· Smooth positive angular transfer of products
· Simple belt tracking system
· Easy maintenance
· Heavy duty steel construction
· Transfers small products
Working principle of Angled belt conveyor
The conveyor belt is driven by its bottom side contacting a heavy duty lagged drive roll. Contamination on the belt surface does not effect the conveyor operation because the drive roll contracts the bottom side of the belt. A spring-loaded take-up roll automatically maintains even belt tension even through changes in loading and temperature.
Angle bar
A polished steel bar is used on the angle end of the conveyor. The fixed angle bar is used to ensure even belt tracking. The conveyor may be positioned with the angle bar as close as 4 mm from the adjoining conveyor. Angle bar of 30 and 45 dgree is available.
Drive roll
The drive lagged, include 152mm diameter ( medium size), 203 mm diameter (thick size), is molded onto the steel roll and machined to provide a high friction surface.
